[Control]
AuthorName=Robert Sheahan
CompanyName=Prolink
DateCreated=12/16/99
Description=Mitutoyo DMX-2
BaudRate=9600
Parity=0
BitsPerByte=8
StopBits=1
FlowControl=0
NoOfChannels=2
Port=COM1
Phone=860.659.5928
E-Mail=Prolink@ProlinkSoftware.com
GetString={Var,Channel}{cr}
DelayTime=
InitString=
Parse=6
ParseLines 1=*{SetVar,MoveWarn,} {SetVar,ErrNum,}~{MoveAbs,2} {StartRead} {Stop*
ParseLines 2=*Read} {ReadVar,Channel} ~{MoveFirst} {StartRead}  {StopRead} {Rea*
ParseLines 3=*dVar,Actual}~{if,{Compare,#=,{var,Actual},9}, ~   {SetVar,ErrNum,*
ParseLines 4=*6}~, ~   {MoveAbs,4} {StartRead} {MoveAbs,12} {StopRead} {ReadVar*
ParseLines 5=*,Actual}~   {If,{Var,MoveWarn}, {SetVar,Action,1},{SetVar,Action,*
ParseLines 6=*0}}~}*
Notes=5
NoteLines 1=*Use a straight cable with a 25 pin male connector on the DMX end.*
NoteLines 2=*  Default is 9600 baud, set lower rate if not using a 16550 serie*
NoteLines 3=*s UART in the serial port. The DMX can use hardware handshaking b*
NoteLines 4=*ut that requires a cable that passes hardware handshaking lines, *
NoteLines 5=*so this script defaults to no handshaking.*